Poultry / Compact Cleaning Unit for conveyor chains

Compact Cleaning Unit for conveyor chains

The LUBING cleaning unit was developed to clean conveyor chains for egg transport. Cleaning is carried out using ultrasound and hot water with an added cleaning agent. As such, the unit safely and reliably removes dirt from the entire conveyor chain, thus removes any hotbeds for bacteria, salmonella or fungus infestation.

The cleaning unit can be retrofitted to an existing Conveyor-System. To do so, a permanently installed deflecting unit is required for the lower chain in the Conveyor-System. The cleaning tank can be stationary or mobile.

Cleaning procedure:

The cleaning tank is attached from below to the connecting part with deflection and fixed there. It is then filled with water. The integrated heater is switched on and the water is heated to approx. 80°C. 1-3% cleaner is added to the tank filling.

The cleaning process starts when the ultrasonic transducers are switched on. The conveyor is also turned on and runs the chain through the tank at standard speed, stopping for 30 to 120 seconds at a time for the piece to be cleaned.

The heated bars automatically dry the chain again after it has passed through the cleaning tank. When the cleaning process is finished, the cleaning liquid can be drained from the tank. The tank is then removed downwards.

 

Benefits

  • cleans conveyor chains for egg transport reliably from dirt and removes any hotbeds for bacteria, salmonella or fungus infestation, highly effectively on an ultrasonic basis
  • inline cleaning by integrating the unit into the conveyor system - no disassembly of the chain necessary
  • can be integrated directly into the conveyor line - also retrofi tted
  • can be used stationary and mobile
  • easy operation and cleaning

Download

Download more information, versions and technical data as a PDF here

0885-1_Kleine_Reinigungseinheit_web.pdf (3 MB)
Connecting part with deflection

Connecting part with deflection

Features

  • guides the conveyor chain for cleaning through the cleaning tank
  • is integrated directly into the conveyor line
Cleaning tank

Cleaning tank

Features

  • an ultrasonic unit (ground transducer) for cleaning the chain
  • heating elements for heating the water
  • size: depending on type
Control

Control

Features

  • regulates functions and takes over all controls fully automatically
Dual timer

Dual timer

Features

  • regulates the time interval for stopping the conveyor chain in the cleaning tank
  • depending on the degree of contamination 30, 60 or 120 seconds selectable
Attachment

Attachment

Features

  • stable bolt system
  • safe stand and optimal alignment of the ultrasonic tank
Liquid sensor

Liquid sensor

Features

  • monitors the level of cleaning liquid in the unit
  • complete shutdown in case of dry running
Cleaner

Cleaner

Features

  • alkaline, solvent-free special cleaner (IWR 31 L)
  • is added to the rinsing water in the tank
  • Dosage: 1-3 % depending on degree of contamination
Shut-off valve

Shut-off valve

Features

  • stable construction
  • large outlet for problem-free drainage of even larger solids