LUBING Young Generation Team 2020

Tag der offenen Tür an der PHWT

 

Six new trainees were welcomed on 3rd of  August 2020 at the headquarter of LUBING Maschinenfabrik in Barnstorf.

Unfortunately, the welcome procedure for the new trainees was different this year than usual due to Corona. The LUBING trainers welcomed the new trainees, albeit with distance, but no less warmly. Erik Felk on his training as a metalworking technician. Glenn Klein will become an electronics technician for industrial engineering and Arne Huntemann will become a mechatronics technician. Colin Adams and Lenny Kramer are trained as industrial mechanics. Agnes Schleich starts her training as an industrial clerk in the administration department.

The group photo at the start of training, with trainers Lena Leukering (left) and Wilfried Finke (right), while observing the minimum distances. In its long training tradition, LUBING has already trained many of its own junior staff and is well positioned for the future with currently 16 trainees and over 200 employees in Barnstorf.

Improvement of Pad-Climate-System

 

Barnstorf, 12.05.2020

Access to the spray tube is now much easier with the new designed deflector. The new deflector can now be folded up in the modified holders, allowing quick access to the spray pipe for inspection or cleaning.

In addition, we now also offer a splash guard profile for mounting on the water gutter. This reduces possible splash water, especially important for applications of the Pad-Climate-System indoors.

More Informationen: Pad-Climate-System

Adaptation of the visitor rules

 

Barnstorf, 29.04.2020

With the Lower Saxony amendment ordinance on the protection against new Infections with the Corona virus from 24.04.2020, it will again be possible to receive visitors at LUBING from 04.05.2020. However, in addition to compliance with all hygiene rules, the prerequisites for this are wearing a mouth and nose protector, an entry in our visitor list and, of course, compliance with the social distance rule (1.5 m as far as possible).

 

We also ask all visitors to make an appointment by telephone in advance to ensure that everything runs smoothly.

 

Strict adherence to the previous measures has enabled us to ensure trouble-free operation within the given possibilities. We would like to continue this in the future and ask everyone to behave further more in an exemplary manner.

 

Many thanks in advance!

Actual message about COVID-19

Barnstorf 2020/03/24

 

We consider it is our duty to participate in the official recommendations to slow down the spread of infection Covid-19.

 

LUBING will continue to operate as normal which means that our sales, customer service and technical staff will remain available to support our customers in their daily needs.

 

The measures we take in the area of our production to comply with the prescribed contact restrictions are demanding a great deal from the LUBING staff. We are grateful for this commitment and appreciate this attitude of solidarity, which is not a matter of course in these difficult times.

 

As we also need to be supplied for our production, we work closely with our suppliers and forwarders to ensure that the right measures are taken for our supply chains.

 

This will enable us to achieve the same production targets in the near future, albeit under different circumstances. Should bottlenecks occur, we will do our utmost to minimise any delay for the benefit of our customers.

 

The only visible change at LUBING will be the restricted access to our premises for visitors, customers and suppliers in order to limit personal contacts which are not absolutely necessary.

 

Like you, we are closely following the very dynamic changes during this time, and we will continue to keep you informed of the effects of developments at LUBING.

 

Keep your physical distance, but let us get through this time side by side.

 

Stay healthy!

Wind Power History

Übergabe Windkraft Pumpe an Windkraftmuseum
Handover Wind Power Pump

 

LUBING is donating a wind power pump from the early 1960s on permanent loan to the German Wind Power Museum.

LUBING Maschinenfabrik was founded in 1949 by Ludwig Bening in Barnstorf, Lower Saxony. In the early years, various products that were needed were manufactured. Initial production also included wind power pumps for supplying water to cattle on grassland. But the interest of the mechanical engineer Ludwig Bening in the wind power plants was particularly pronounced. The range of wind power pumps (trade name: LUBING Windkraftpumpen) soon became the most important product area in the company.

Entwicklung der Flügel
Development of the blades

The blades of the wind power pumps were initially bent sheets.

 

But already since 1955 polystyrene was used for the production of blades. This was another reason why the sale of   wind power pumps reached its peak in 1960.

 

The increasing export share to neighboring countries such as the Netherlands, Luxembourg, Belgium, Denmark, but also overseas such as Mexico and Chile also contributed to this.

 

The blades were later made of other plastics by injection moulding. In addition to the 4 and 6-blade wind power pumps, wind power pond aerators were also added to the product range.

 

Cord Kütemeyer gives hints
Cord Kütemeyer gives hints

LUBING Maschinenfabrik still manufactures wind turbines today, but only in very small quantities. Cord Kütemeyer, employed at LUBING since 1975, assembles them, sometimes even working at home.

 

For the German Wind Power Museum, he has reconditioned an old rotor head from the early 1960s from his collection. With a new pump, new blades and new mast, this turbine was handed over to the Wind Power Museum today on permanent loan.

 

With this installation, a piece of the company history will now be preserved for posterity in the museum.

 

We are very happy about this project and hope that this almost 60 year old turbine, especially for the young visitors, will be able to illustrate for a long time to come how easily wind power was and still is used.

New Turkey drinker EasyLine 2.0

LUBING EasyLine 2.0

 

With this enhancement EasyLine 2.0 succeeded in further improving the water supply to the animals and also thereby facilitating ac-cessibility to the nipple. The proven principle with pendulum, bowl and nipple remains un-changed. With the new turkey nipples Art. 4001-4, which are now arranged to the side of the pendulum, we have achieved an even longer service life of the drinker and thus increase the reliability of the water supply even further due to two nipples per cup. Maintenance is made much easier by attaching the double nipple pendulum with a socket pin.

More details

New service for you:

LUBING Helpdesk

 

LUBING WhatsApp Business

LUBING now also offers its customer service via WhatsApp. This is intended to give you another way (in addition to phone and e-mail) to reach the hotline.

Our service team can be reached at +49 171 22 16 195 via WhatsApp. This number must be saved in the phone book of your mobile phone and will then appear in the list of available WhatsApp contacts.

 

The WhatsApp chat is available at these times

Our service team is initially reachable on weekdays from

Monday to Thursday from 8:00 to 16:30 as well as on

Fridays between 8:00 and 15:00 (MEZ).

Customers can also leave their requests outside these hours via WhatsApp. Users will receive an answer as soon as possible, on the next working day.

 

The service staff only answer within a conversation that has already started and do not write to customers on their own initiative. The history is always available, so customers don't have to explain their concerns again. Employees do not see any other data apart from the chat history, the WhatsApp phone number and the name stored in the Messenger.

 

Topics for WhatsApp Support

The range of topics that can be clarified via the messenger chat includes all questions of technical support. This ranges from technical questions to technical documents or tips and tricks for assembling or using our products. The simple and fast transmission of photos is certainly one of the great advantages.

Questions about orders and delivery times cannot be answered here.

LUBING 70th anniversary

LUBING 70
70 Years of LUBING

 

 

On Friday, 06th of September 2019 the 70th anniversary of the company LUBING was celebrated on the company premises. In the afternoon all employees and their families, as well as pensioners and our neighbours from Lubingstraße were invited. With 400 seats, our dispatch department was transformed into a large café. After coffee, cake, ice cream and cold drinks, the guests started a tour through the company. Besides the historical development of the company some of our current production processes could be seen.

 

In the evening the LUBIläum was duly celebrated with all employees and guests of the agent meeting in one of the newly taken over halls.

 

 

Agent Meeting group 2019

5tes Agententreffen 2019
Group photo Agent Meeting 2019

 

In the first week of September, 70 years after the company was founded, representatives of the worldwide subsidiaries and agencies met to exchange ideas with the representatives of LUBING Germany. The following days were accompanied above all by intensive product training, a supporting programme ensured the festive character of the meeting. On 6.9. the anniversary week reached its climax with a joint company celebration of all representatives and employees on the
company premises.

International agent meeting

5tes Agententreffen 2019
Agent Meeting 2019

 

70 years of company history make 2019 a special year for LUBING from Barnstorf. The 5th international agent meeting took place again in Barnstorf at the company headquarters with representatives of subsidiaries and branches. Almost 60 guests from 30 countries came to learn about new product developments and to discuss the worldwide development processes in agricultural animal husbandry.

Welcome!

Ausbildungsbeginn 2019
LUBING Young Generation Team 2019

 

LUBING Young Generation Team 2019

Five trainees, one dual student and one annual trainee were welcomed at the Barnstorf headquarters of LUBING Maschinenfabrik on August 1, 2019.

This year, in which LUBING celebrates its 70th anniversary, Andrej Limberg started his training as a machine and plant operator. Levin Kenneweg is trained as an electronics technicians for operations technology and Alireza Jahangiri as a specialist for metal technology. Konrad Book began his training as an industrial clerk in administration, where Ann-Katrin Zillig also completed her annual internship. At our research center, Lennard Greve started his training as a technical product designer and Stefan Aßling his dual studies in mechanical engineering.

The group photo, this time with the trainers Lena Leukering (right) and Michael Schelhas (left) at the start of the training with a clear reference to the upcoming 70th anniversary celebration, which will take place in September. We are proud of our long history and are well positioned for the future with currently 13 young people in training.

NEW! LUBING D-Line pump units

LUBING D-Line pump unit
NEW! LUBING D-Line pump unit

 

Change of the Top-Climate-System product range to a modular design

 

 

In order to meet the requirements of the various markets more flexibly, we are planning a changeover of the product range at the Top-Climate-Systems. The Eco pump units will initially be affected by the changeover.

The future modular design will allow many new combinations for individual adaptation. In the future, we will therefore be able to cover a large number of individual variants with a small number of modules.

Further information 

Donation 2018

Spenscheckübergabe
Donation handover 2019

 

Symbolic donation cheque handover in February 2019

 

Traditionally, the donation cheques were handed over to the recipients shortly before Christmas. Last year, however, this did not fit and so an appointment was made this year. During the visit in the spring-like February 2019 from Mrs Schäfer from the primary school Eydelstedt and Mr Stubbe from the booster club "Förderverein Eydelstedt" (both for the family and education centre Eydelstedt) as well as Mr Pastor Schröder for the food bank "Tafel Barnstorf" and Mr Rattay from the historical society "Heimatverein Barnstorf" the donation cheques were handed over symbolically.

EuroTier 2018

EuroTier 2018
LUBING booth at EuroTier 2018

Many thanks to the numerous visitors of our booth!

Our international LUBING team was at your disposal at EuroTier 2018 for all questions regarding the pig product range in Hanover.

This year LUBING was represented at the EuroTier, without the World Poultry Show, only with the product range pigs.

Numerous visitors informed themselves in great conversations about the latest state of the Drinking-Systems, Climate-Systems and house equipment..

Many visitors were particularly interested in our stand at the first time presented waste air purification with the CleaningCubes. This modular multi-stage system was presented with a complete module for an air volume of 25,000 m³/h thanks to the latest technology, which enables smallest sizes. The control of the CleaningCubes, adapted to the ventilation rate, reduces operating costs to a minimum.

Here is a short video of the exhibition stand:

LUBING Accessories for Conveyor-Systems

LUBING Zubehör Förder-SystemeConveyor-Systems
LUBING Conveyor-Systems accessories

 

New accessories for LUBING Conveyor-Systems

 

LUBING Lift column

The LUBING lift columns have been completely revised to provide a more flexible installation. Drive shafts and struts are now adjustable. This allows a quicker adaptation to the structural requirements. The drop protection for securing the Lift-System has been adapted to the current technical state of the art. Furthermore, the LUBING lift columns are available for different transfer heights depending on customer requirements. On request also special voltages can be taken into account.

LUBING Conveyor-Systems accessories
LUBING Conveyor-Systems accessories

LUBING Egg counter EMEC

The egg counter EMEC enables the reliable counting of eggs already on the Conveyor-System. In addition to the daily sum of eggs, the display also shows the current transport rate in eggs per hour. The EMEC egg counter is available for widths of 350, 500 and 750.

 

Drip oiler accessories: Float switch and drip oiler timer Uni Control

To guarantee an optimal lubrication of the Conveyor-System, we offer optional accessories for the LUBING drip oilers. A float switch can be used to actively monitor the level in the oiler reservoir. If the oil level is too low, the control system can either trigger an alarm or stop the Conveyor-System.

The drip oiler timer Uni Control can be programmed according to the LUBING lubricating instruction for drip oilers. The controller automatically switches the drip oiler based on the operating hours of the Conveyor-System. This ensures a uniform and safe lubrication.

 

LUBING Young Generation Team 2018

LUBING Young Generation Team 2018
LUBING Young Generation Team 2018

 

Five new trainees started at the Barnstorf headquarters on 01.08.2018.
Mr. Elver Abazaj started his training as a machine and plant operator. Rune Scheland is trained as a cutting machine operator. Markus Bruna is trained as a specialist in warehouse logistics and Louis Gruetter as a specialist in metal technology. Jannik Wacker started his training as an industrial clerk.
The group photo this time with the trainers Lena Leukering and Wilfried Finke to the training start, belongs meanwhile already to our tradition and we are proud to be able to train at present 15 young people.

VIV Europe 2018

VIV Europe 2018
LUBING Exhibition-Team VIV Europe 2018

 

 

Our international LUBING team was at your disposal at VIV Europe 2018 for questions in the field of Drinking-, Conveyor and Climate-Systems. Our new products such as the Optima E-Control and the water wall, where own pictures could be represented, were the highlights on the exhibition booth.

 

LUBING Accumulator table

LUBING Accumulator table
LUBING Accumulator table

 

Our accumulator tables have been technically improved with the new frame design. The further development of the plastic elements is now the basis for the robust but easy-to-clean accumulator table mat. These optimizations facilitate transport and assembly of the accumulator tables. In addition to the available standard dimensions of the accumulator tables, we can also take special requests into account.

Further information 

NEW! LUBING SteelNaster

LUBING SteelMaster
LUBING SteelMaster

 

At the development of this stainless steel nipple, special attention was paid to the increased hygiene requirements. As with the CombiMaster nipple, which has the same properties but a plastic housing, the optimum water supply for the animals is paramount. The flow rate is adapted to the needs of the respective bird age. Because of the climatic influence on the water demand, we have developed two variants with different flow rates. The SteelMaster item 4020 has a higher flow rate and should therefore always be used with a drip cup. With the SteelMaster item 4021, the flow rate is slightly lower and can be used without a drip tray. Further information can be found here: SteelMaster

Christmas 2017

Donation cheque delivery
Donation cheque delivery 2017

Donation cheque delivery

Traditionally, donation cheques were handed over to the recipients shortly before Christmas. During the visit of Mrs. El-Haje from the kindergarten "Kleine Strolche" as well as Mrs. Klauke and Mrs. Gaertner from the "Förderverein der Grundschüler in Barnstorf e. V." the donation cheques were symbolically handed over. The fact that we do without the usual Christmas gifts and support various social projects in Barnstorf and the surrounding area with the corresponding amount is after 10 years already a small tradition and therefore nothing new. New this year is that both projects have already been completed at the presentation of cheques. The "Kleine Strolche" needed their donation already in summer to carry out the reconstruction measures during the summer break. For the project "Green Classroom" the donation was needed in autumn and the project was finished last week.

Takeover of „LUBING International S.A.“

LUBING France

 

 

LUBING Maschinenfabrik has announced the complete takeover of “LUBING International S.A.” in France. LUBING International S.A., founded in 1971, was the first foreign representation of LUBING Maschinenfabrik and the only subsidiary company that was legally and financially independent. With this transaction, LUBING Maschinenfabrik aims to realign its sales, purchasing and flexibility of European production capacities.

Markus von der Assen commented on this change: "With LUBING International in Sailly-

LUBING Frankreich
LUBING International S.A. France

sur-la-Lys (near Lille) we have a good location in France. Faster decisions and simplified structures will allow us to become even more flexible in order to react quickly to market conditions. France will play a central role in our planned expansion of activities in Africa. LUBING Ibérica, the company founded by LUBING International in Spain, was also taken over by us. Here, we will continue to expand our activities in Spain and Portugal as desired, with the full support of Germany.”

Frédéric Senechal, LUBING International's sales manager, said: "This move will enable us to create a strong platform for growth in Europe. Thanks to our existing customer base, we will be able to increase sales by leveraging synergies. In particular, we expect strong growth in some African countries."

Christmas in summer 2017

Kleine Strolche 2017
Kleine Strolche 2017

 

It is now a tradition that we do without the usual Christmas gifts and support various social projects in Barnstorf and the surrounding area with the corresponding amount.

New this year is the early date of donation.

The “Kleine Strolche” (a kindergarten) in Barnstorf have now learned that they can look forward to a "premature" Christmas present in the summer as well. As the project was to be completed at the start of the new kindergarten year, we made a part of our Christmas donation available in the summer. This enabled companies to carry out the conversion work at the nursery during the summer holidays. As a result of this conversion, 30 children between two and six years old can now be cared for five days a week.

But we are not yet revealing to whom the second part of our Christmas donation goes...

LUBING Young Generation Team 2017

LUBING Young Generation Team 2017
LUBING Young Generation Team 2017

 

Also this year the company LUBING Maschinenfabrik promotes own young professionals once again.  We are proud to welcome four new apprentices to our company on 1st of August 2017.

The trainees in the center from left to right:
Anna Freye (industrial clerk), Lukas Brokamp (mechatronics technicians),
Patrik Schwettmann (machine and equipment operator), Abdulkadir Sincar (specialist for metal technology) with the human resource department represented by Kerstin van Anken (left) and Lena Leukering (right).

NEW! LUBING E-Dos Touch

LUBING E-Dos Touch
LUBING E-Dos Touch

 

The combination of the electrical doser E-Dos and our controller LUBING touch control: E-Dos Touch!


LUBING offers two new versions for the electrical dosing into the drinking water with the E-Dos Touch 1 and 2.

Specifically for the norm DIN 10529-2 (Dosing apparatus for the oral medication of powdery or liqiud proprietary medicinal products at farm livestock - Part 2: Dosing apparatus for liquid proprietary medicinal products for application by using drinking water) specified in the guideline " Oral administration of veterinary medicines in the livestock sector through feed or drinking water”) we developed the E-Dos 2 Touch.

NEW! LUBING Touch Control LCM

LUBING Touch Control
LUBING Touch Control LCM

 

End of January 2016, the changeover took place for the multi house controller and pump units with frequency converter. The operation via touch screen allows an easy handeling of the LUBING Top-Climate-Systems.

 

Here at a glance the new item numbers:

Previous

Item number

New

item number

Type

7706

7744

LCM

7706-2

7745

LCM vario

7708

7750

Extension box